Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to: Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
Turn the ignition switch OFF, and then remove battery (-) cable.
Remove the fuel tank.
(Refer to: Fuel Delivery System - "FUEL TANK ").
Disconnect the low pressure fuel feed tube quick-connector (A).

Fig 1: Identifying Low Pressure Fuel Feed Tube Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 2: Identifying Vapor Hose
Courtesy of HYUNDAI MOTOR AMERICA
Lift the vehicle.
Remove the heat protector installation nut (A).
Remove the fuel line fixing bracket (B) after removing the installation nut (C).

Fig 3: Removing Fuel Line Fixing Bracket Installation Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Open the fuel line fixing clip with the (-) driver.
Remove the fuel line (A) under the vehicle. Be careful not to damage the fuel line.

Fig 4: Removing Fuel Line Under Vehicle
Courtesy of HYUNDAI MOTOR AMERICA
Open the fuel line fixing clip with the (-) driver.
Remove the fuel line (A) under the vehicle. Be careful not to damage the fuel line.

Fig 5: Removing Fuel Line Under Vehicle
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Identifying Fuel Line
Courtesy of HYUNDAI MOTOR AMERICA