FixVault
Home › Hyundai › 2016 › Elantra SE, Automatic Trans › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart key unit › Repair procedures › Removal › Trunk lid open switch

Trunk lid open switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk door trim.

    (Refer to "TRUNK ")

  3. Disconnect the trunk lid open switch connector (A).
    Fig 1: Trunk Lid Open Switch Connector
    G10530833Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the trunk outside handle (A) after pressing the clips.
    Fig 2: Pressing Trunk Outside Handle Clips
    G10530834Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Trunk Outside Handle
    G10530835Courtesy of HYUNDAI MOTOR AMERICA
About FixVault