Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the Lower Crash Pad.
(Refer to: the Body - "CRASH PAD ").
Disconnect the stop lamp switch connector (A).

Fig 1: Identifying Stop Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Pull the locking plate (A) as indicated by the pointer.

Fig 2: Pulling Locking Plate
Courtesy of HYUNDAI MOTOR AMERICA
Turn stop lamp switch 45° counter-clockwise and remove it.

Fig 3: Turning Stop Lamp Switch
Courtesy of HYUNDAI MOTOR AMERICA