Repair Procedures: Replacement
WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the glove box housing.
(Refer to: Body - "GLOVE BOX HOUSING ").
- Remove the shower duct (A).
- Disconnect the connector and then remove the Cluster Ionizer (B) after loosening the mounting screws.
- Install in the reverse order of removal.