FixVault
Home › Hyundai › 2016 › Equus Signature › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Power Trunk Module › Power Striker › Repair procedures › Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk trim in the trunk.

    (Refer to "TRUNK TRIM ")

  3. Disconnect the power striker connector (A).
    Fig 1: Power Striker Connector
    G10387342Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power striker (A) after removing the screws.
    Fig 2: Removing Power Striker
    G10387343Courtesy of HYUNDAI MOTOR AMERICA
About FixVault