FixVault
Home › Hyundai › 2016 › Equus Signature › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Crankshaft Position Sensor (CKPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Crankshaft Position Sensor Connector
    G10382662Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the sensor (B) after removing the installation bolt (A).
    Fig 2: Sensor And Installation Bolt
    G10382663Courtesy of HYUNDAI MOTOR AMERICA
About FixVault