FixVault
Home › Hyundai › 2016 › Equus Ultimate › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Manifold Absolute Pressure Sensor (MAPS) › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G10382653Courtesy of HYUNDAI MOTOR AMERICA
About FixVault