Repair procedures: Removal

CAUTION: Use caution when handling the transfer case.
Preventing the ITA (Integrated Transfer case Actuator) from damage

In case of transporting the transfer case
- Use caution when lifting the transfer case from the transporting package to make sure the ITA does not collide with the other transfer case.
- Use caution for the ITA not to be impacted from the floor or structure.
In case of assembling the transmission

Use caution for the ITA not to be impacted from contacting the transmission, floor or structure.

Fig 1: Caution For ITA Not To Be Impacted From Contacting Transmission

Courtesy of HYUNDAI MOTOR AMERICA

Remove the transfer case from the vehicle.
(Refer to "TRANSFER CASE ASSEMBLY ")
Release filler plug (A) and oil drain.

Fig 2: Filler Plug
Courtesy of HYUNDAI MOTOR AMERICA
Install the slide hammer on the flange (A).
Pull out the flange (A).

Fig 3: Pulling Out Flange
Courtesy of HYUNDAI MOTOR AMERICA
Remove the radial seal ring (A).

Fig 4: Removing Radial Seal Ring

Courtesy of HYUNDAI MOTOR AMERICA