FixVault

Trunk open switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Trunk lid back panel.

    ( "TRUNK LID BACK PANEL ")

  3. Remove the Trunk lid trim.

    ( "TRUNK LID TRIM ")

  4. Remove the trunk open switch assembly (A) after loosening the mounting clip.
    Fig 1: Trunk Open Switch Assembly
    G10454183Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the connector (A), Remove the trunk open switch.
    Fig 2: Trunk Open Switch Connector
    G10454184Courtesy of HYUNDAI MOTOR AMERICA