Repair procedures: Inspection: Toe

Fig 1: Measuring Toe

Courtesy of HYUNDAI MOTOR AMERICA

Item	Description
A-B < 0	Positive (+) toe (toe in)
A-B > 0	Negative (-) toe (toe out)

NOTE:

• Toe-in adjustment should be made by turning the right and left tie rods with the same torque
• When adjusting toe-in, loosen the outer bellows clip to prevent the bellows clip from being twisted.
• After the adjustment, tighten the tie rod end lock nuts firmly and reinstall the bellows clip.
• Adjust each toe-into be within the range of ±0.1°.