FixVault
Home › Hyundai › 2016 › Genesis Coupe 3.8, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.8L › Canister Close Valve - CCV › Repair procedures › Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the service cover (A) in the trunk.
    Fig 1: Service Cover
    G10493871Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B) from the canister close valve.
    Fig 2: Canister Close Valve Connector And Ventilation Hose
    G10493872Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the CCV from the fuel tank air filter assembly after removing 2 bolts (A).
    Fig 3: Canister Close Valve Bolts
    G10493873Courtesy of HYUNDAI MOTOR AMERICA
About FixVault