Service Adjustment Procedure: Replacement
WARNING: This page is about a different variant/trim than selected.
- With the vehicle parked on a level surface, remove the drain plug.
- Drain the transmission oil after loosening the drain plug (A).
- Install the drain plug with new gasket.
Tightening torque:
60 ~ 80 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)
- Add new oil through the fill plug hole and, fill it just below the plug opening.
Standard oil: SAE 75W/85, API GL-4
Oil capacity: 2.2 l (2.3US qt, 1.94 lmp qt)