Repair procedures: Installation

Installation is reverse of removal.
CAUTION:
- In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to "IMMOBILIZER SYSTEM " or "BUTTON ENGINE START SYSTEM " ).
- After exchanging TCM, input the EOL (End of line).
  (Refer to "REPAIR PROCEDURES " )
- When replacing the TCM, reset the automatic transmissions values by using the GDS.
- Perform TCM learning after replacing the TCM.
  
  Fig 1: Screen Display - Reset Automatic Transmission Values
  Courtesy of HYUNDAI MOTOR AMERICA