FixVault
Home › Hyundai › 2016 › Santa Fe Sport 2.0T, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Fuel Pressure Control Valve › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the Fuel pressure control valve connector.
  3. Measure resistance between the Fuel pressure control valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : Refer to "SPECIFICATION "

About FixVault