FixVault
Home › Hyundai › 2016 › Santa Fe Sport 2.0T, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › RCV Control Solenoid Valve › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the RCV control solenoid valve after disconnect the connector (A), bolt (B) and RCV hose (C).
    Fig 1: Identifying RCV Control Solenoid Valve Connector, Bolt And RCV Hose
    G10582844Courtesy of HYUNDAI MOTOR AMERICA
About FixVault