FixVault
Home › Hyundai › 2016 › Santa Fe Sport Base, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart Key Unit › Repair Procedures › Removal › Smart Key Unit

Smart Key Unit

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Driver Crash Pad Lower Panel.

    (Refer to: Body - "CRASH PAD LOWER PANEL ").

  3. Remove the smart key unit (B) after loosening the mounting bolts (2EA) and disconnecting the connector (A).
Fig 1: Smart Key Unit Connector And Mounting Bolts Location
G10584447Courtesy of HYUNDAI MOTOR AMERICA
About FixVault