FixVault
Home › Hyundai › 2016 › Sonata Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L (Except HEV) › Canister Close Valve (CCV › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Remove the rear-left wheel & tire and the wheel house cover.
  4. Disconnect the canister close valve connector (A).
  5. Disconnect the ventilation hose (B) connected to the fuel tank air filter and canister close valve.
  6. Remove the fuel tank air filter after removing the installation bolt (C).
    Fig 1: Canister Close Valve Connector And Ventilation Hose Installation Bolt
    G10573557Courtesy of HYUNDAI MOTOR AMERICA
  7. Release the lever (A), and then rotate the canister close valve (B) in the direction of an graphic.
  8. Remove the canister close valve from the fuel tank air filter.
    Fig 2: Identifying Lever
    G10573558Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Identifying Canister Close Valve
    G10573559Courtesy of HYUNDAI MOTOR AMERICA
About FixVault