Repair Procedures: Removal

Remove the valve body assembly.
(Refer to: Valve body System - "VALVE BODY ").
Disconnect the input & output speed sensor connector (A) from the main wiring.
Remove the input & output speed sensor (B) after removing the bolts (2EA).
Tightening Torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Identifying Input And Output Speed Sensor And Connector
Courtesy of HYUNDAI MOTOR AMERICA