FixVault
Home › Hyundai › 2016 › Sonata Eco › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L (Except HEV) › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  3. Disconnect the ETC module connector (A).
    Fig 1: Locating ETC Module Connector
    G10566674Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolts, and then remove the ETC module (A) from the Engine.
    Fig 2: Removing ETC Module Bolts
    G10566675Courtesy of HYUNDAI MOTOR AMERICA
About FixVault