FixVault

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air duct and air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Disconnect the EEGR control valve connector (A).
    Fig 1: Disconnecting EEGR Control Valve Connector
    G12060857Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the EEGR control valve (B) after removing the mounting bolt (A).
Fig 2: Removing EEGR Control Valve Mounting Bolt
G12060858Courtesy of HYUNDAI MOTOR AMERICA