FixVault
Home › Hyundai › 2016 › Sonata Plug-In Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (PHEV) › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    Fig 1: Disconnecting Crankshaft Position Sensor Connector
    G11631012Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Crankshaft Position Sensor Connector Location
    G11631013Courtesy of HYUNDAI MOTOR AMERICA
About FixVault