FixVault
Home › Hyundai › 2016 › Sonata Plug-In Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (PHEV) › Intake Air Temperature Sensor (IATS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Removing Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G11631005Courtesy of HYUNDAI MOTOR AMERICA
About FixVault