FixVault
Home › Hyundai › 2016 › Sonata Plug-In Hybrid › Repair and Diagnosis › External Pages › Different variant/trim › Section 76 (Smart Key System (Except HEV)) › Smart Key Unit › Repair Procedures › Removal › Trunk Open Switch

Trunk Open Switch

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the trunk lid trim.

    (Refer to: Body - "TRUNK LID TRIM ").

  3. Disconnect the trank open switch connector (A).
    Fig 1: Disconnecting Trank Open Switch Connector
    G10567568Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the trunk open switch after disengaging mounting clip.
    Fig 2: Removing Trunk Open Switch
    G10567569Courtesy of HYUNDAI MOTOR AMERICA
About FixVault