Repair Procedures: Inspection

Turn ignition switch OFF.
Remove the Hybrid Power Control Unit (HPCU) assembly. (Refer to Hybrid Control System-"HPCU ")
Disconnect the solenoid valve connector (A).

Fig 1: Disconnecting Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA
Measure the resistance between power terminal (10) and signal terminal (7).
Specification: 5.1 ± 0.3 Ω

Fig 2: Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Connector Resistance Measurement Terminals Connector End View
Courtesy of HYUNDAI MOTOR AMERICA