Repair Procedures: Disassembly

1. Remove the plastic bracket (A) and then disconnect the "P" position switch.
   Fig 1: Disconnecting P Position Switch

   Courtesy of HYUNDAI MOTOR AMERICA
2. Disconnect the shift lock solenoid (A).
   Fig 2: Disconnecting Shift Lock Solenoid

   Courtesy of HYUNDAI MOTOR AMERICA
3. Disconnect the main connector (A) from the shift lever.
   Fig 3: Disconnecting Main Connector From Shift Lever

   Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the mounting bracket (A) of terminals from the main connector.
   Fig 4: Removing Mounting Bracket Terminals From Main Connector

   Courtesy of HYUNDAI MOTOR AMERICA
5. Remove each terminals of the P position switch (A), shift lock solenoid (B) from the main connector (C).
   CAUTION: Record the location of the wiring colors before disconnecting the terminals.

Fig 5: Removing P Position Switch, Shift Lock Solenoid From Main Connector

Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: P Position Switch, Shift Lock Solenoid, Main Connector

Courtesy of HYUNDAI MOTOR AMERICA

Information 

Fig 7: P Position Switch Connector Terminals

Courtesy of HYUNDAI MOTOR AMERICA