FixVault
Home › Hyundai › 2016 › Tucson Limited, FWD › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Proceed to Body - "CRASH PAD LOWER PANEL ")

  3. Separate the SSB from the crash pad after pressing the retaining clips (A) on both sides of the SSB.
    Fig 1: Pressing SSB Retaining Clips
    G11670495Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the SSB (B) after disconnecting the connector (A).
Fig 2: Locating SSB Connector
G11670496Courtesy of HYUNDAI MOTOR AMERICA
About FixVault