Dual Clutch Transmission DTCS
DUAL CLUTCH TRANSMISSION DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P0601-41 | Internal Control Module Memory Check Sum Error |
| DTC P0601-47 | Functional Safety Level 3 S/W Fail |
| DTC P0601-48 | Functional Safety Level 2 S/W Fail |
| DTC P06B0-11 | Odd Sensor Supply Short to Ground |
| DTC P06B3-11 | Even Sensor Supply Short to Ground |
| DTC P0705-29 | Inhibitor Switch Invalid Code |
| DTC P0705-64 | Inhibitor Switch Unused Code |
| DTC P0715-12 | Input Speed Sensor 1 Short to Battery |
| DTC P0715-14 | Input Speed Sensor 1 Short to Ground/Open |
| DTC P0716-03 | Input Speed Sensor 1 Circuit Range/Performance (Invalid Pulse Width) |
| DTC P0716-31 | Input Speed Sensor 1 Circuit Range/Performance (No Pulse) |
| DTC P073E-07 | Gear Dropout Reverse Gear |
| DTC P073E-71 | Unable to Engage (Select) Reverse Gear |
| DTC P073E-72 | Unable to Engage - Synchronization Error (Shift) Reverse Gear |
| DTC P073E-73 | Unable to Engage (Shift) Reverse Gear |
| DTC P073E-77 | Unable to Disengage (Shift) Reverse Gear |
| DTC P073F-07 | Gear Dropout Gear 1 |
| DTC P073F-71 | Unable to Engage (Select) Gear 1 |
| DTC P073F-72 | Unable to Engage - Synchronization Error (Shift) Gear 1 |
| DTC P073F-73 | Unable to Engage (Shift) Gear 1 |
| DTC P073F-77 | Unable to Disengage (Shift) Gear 1 |
| DTC P074A-07 | Gear Dropout Gear 2 |
| DTC P074A-71 | Unable to Engage (Select) Gear 2 |
| DTC P074A-72 | Unable to Engage - Synchronization Error (Shift) Gear 2 |
| DTC P074A-73 | Unable to Engage (Shift) Gear 2 |
| DTC P074A-77 | Unable to Disengage (Shift) Gear 2 |
| DTC P074B-07 | Gear Dropout Gear 3 |
| DTC P074B-71 | Unable to Engage (Select) Gear 3 |
| DTC P074B-72 | Unable to Engage - Synchronization Error (Shift) Gear 3 |
| DTC P074B-73 | Unable to Engage (Shift) Gear 3 |
| DTC P074B-77 | Unable to Disengage (Shift) Gear 3 |
| DTC P074C-07 | Gear Dropout Gear 4 |
| DTC P074C-71 | Unable to Engage (Select) Gear 4 |
| DTC P074C-72 | Unable to Engage - Synchronization Error (Shift) Gear 4 |
| DTC P074C-73 | Unable to Engage (Shift) Gear 4 |
| DTC P074C-77 | Unable to Disengage (Shift) Gear 4 |
| DTC P074D-07 | Gear Dropout Gear 5 |
| DTC P074D-71 | Unable to Engage (Select) Gear 5 |
| DTC P074D-72 | Unable to Engage - Synchronization Error (Shift) Gear 5 |
| DTC P074D-73 | Unable to Engage (Shift) Gear 5 |
| DTC P074D-77 | Unable to Disengage (Shift) Gear 5 |
| DTC P074E-07 | Gear Dropout Gear 6 |
| DTC P074E-71 | Unable to Engage (Select) Gear 6 |
| DTC P074E-72 | Unable to Engage - Synchronization Error (Shift) Gear 6 |
| DTC P074E-73 | Unable to Engage (Shift) Gear 6 |
| DTC P074F-77 | Unable to Disengage (Shift) Gear 7 |
| DTC P0805-64 | Clutch 1 Motor Hall Sensor circuit |
| DTC P0820-08 | TGS Lever Complement Value |
| DTC P0820-16 | TGS Lever Under Voltage |
| DTC P0820-17 | TGS Lever Over Voltage |
| DTC P0820-1C | TGS Lever Voltage Out of Range |
| DTC P087A-64 | Clutch 2 Motor Hall Sensor Circuit |
| DTC P0880-1C | TCM Power Input |
| DTC P0900-01 | Clutch 1 Motor UVW Circuit |
| DTC P0901-71 | Clutch 1 System Actuator Stuck |
| DTC P0901-73 | Clutch 1 System Stuck OFF |
| DTC P0901-78 | Clutch 1 System Reference Position Failure |
| DTC P0904-12 | Select 1 Position Sensor Short to Battery |
| DTC P0904-14 | Select 1 Position Sensor Short to Ground Open |
| DTC P090A-01 | Clutch 2 Motor UVW Circuit |
| DTC P090B-71 | Clutch 2 System Actuator Stuck |
| DTC P090B-73 | Clutch 2 System Stuck OFF |
| DTC P090B-78 | Clutch 2 System Reference Position Failure |
| DTC P0910-11 | Select 1 Solenoid Push Pull Short to Ground |
| DTC P0910-12 | Select 1 Solenoid Push Pull Short to Battery |
| DTC P0910-13 | Select 1 Solenoid Push Pull Open |
| DTC P0910-15 | Select 1 Solenoid LSD Short to Battery |
| DTC P0914-64 | Shift 1 Motor Hall Sensor Circuit |
| DTC P0920-01 | Shift 1 Motor UVW Circuit |
| DTC P0921-77 | Gear 1 System Referencing Failure |
| DTC P0921-98 | Gear 1 System Motor Thermal Damage |
| DTC P0955-29 | Manual Mode Switch |
| DTC P17C0-00 | DCT None - EOL |
| DTC P1904-12 | Select 2 Position Sensor Short to Battery |
| DTC P1904-14 | Select 2 Position Sensor Short to Ground Open |
| DTC P1910-11 | Select 2 Solenoid Push Pull Short to Ground |
| DTC P1910-12 | Select 2 Solenoid Push Pull Short to Battery |
| DTC P1910-13 | Select 2 Solenoid Push Pull Open |
| DTC P1910-15 | Select 2 Solenoid LSD Short to Battery |
| DTC P1914-64 | Shift 2 Motor Hall Sensor Circuit |
| DTC P1920-01 | Shift 2 Motor UVW Circuit |
| DTC P1921-77 | Gear 2 System Referencing Failure |
| DTC P1921-98 | Gear 2 System Motor Thermal Damage |
| DTC P2765-12 | Input Speed Sensor 2 Short to Battery |
| DTC P2765-14 | Input Speed Sensor 2 Short to Ground Open |
| DTC P2766-03 | Input Speed Sensor 2 Circuit Range Performance (Invalid Pulse Width) |
| DTC P2766-31 | Input Speed Sensor 2 Circuit Range Performance (No Pulse) |
| DTC U0001-88 | CAN Communication Bus OFF |
| DTC U0100-87 | Lost Communication With ECM PCM |
| DTC U0121-87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module |
| DTC U1100-87 | High Speed CAN 2 Lost Communication (EMS-DCT) |
| DTC U1103-41 | Check Sum Error with TGS Lever |
| DTC U1103-82 | TGS Lever Alive Counter Error |
| DTC U1103-87 | Lost Communication With TGS Lever |
| DTC U1117-88 | High Speed CAN 2 Communication (EMS-DCT) |