Repair Procedures: Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the CVVT oil control valve connector (A).
3. Remove the installation bolt (B), and then remove the valve from the engine.

[Bank 1/Intake] 

Fig 1: Locating CVVT Oil Control Valve (OCV) Installation Bolt - Bank 1/Intake

Courtesy of HYUNDAI MOTOR AMERICA

[Bank 1/Exhaust] 

Fig 2: Locating CVVT Oil Control Valve (OCV) Installation Bolt - Bank 1/Exhaust

Courtesy of HYUNDAI MOTOR AMERICA