FixVault
Home › Hyundai › 2016 › Tucson SE, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Locating Crankshaft Position Sensor (CKPS) Connector
G11643649Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Locating Crankshaft Position Sensor (CKPS) Installation Bolt
G11643650Courtesy of HYUNDAI MOTOR AMERICA
About FixVault