Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Disconnect the Back-Up Lamp Switch Connector (A).

Fig 1: Back Up Lamp Switch Connector Location
Courtesy of HYUNDAI MOTOR AMERICA
Check the continuity between No. 1 and 2 Terminals of Back-Up Lamp Switch. When the Shift Lever is in reverse, there should be continuity.
If necessary, repair or replace the Back-Up Lamp Switch.

Fig 2: Checking Continuity Between No. 1 And 2 Terminals Of Backup Lamp Switch

Courtesy of HYUNDAI MOTOR AMERICA