FixVault
Home › Hyundai › 2016 › Veloster Base, Automatic DCT Trans › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Engine Control System - 1.6L T-GDI) › Ambient Temperature Sensor (ATS) › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Ambient Temperature Sensor Connect (A).
  3. Remove the Ambient Temperature Sensor Bracket (B).
Fig 1: Identifying Ambient Temperature Sensor Bracket And Connector
G10604542Courtesy of HYUNDAI MOTOR AMERICA
About FixVault