FixVault
Home › Hyundai › 2016 › Veloster Base, Automatic DCT Trans › Repair and Diagnosis › Transmission › Transmission Control Systems › Dual Clutch Transmission Control System - 1.6L GDI › Input Speed Sensor 2 › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the Under Cover.
  2. Disconnect the Input Shaft Speed Sensor Connector (a).
    Fig 1: Input Shaft Speed Sensor 2 Connector (1 Of 2)
    G10608144Courtesy of HYUNDAI MOTOR AMERICA
  3. Loosen the Mounting Bolt and remove the Input Shaft Speed Sensor (B).
Fig 2: Input Shaft Speed Sensor 2 (2 Of 2)
G10608145Courtesy of HYUNDAI MOTOR AMERICA
About FixVault