Crash Pad Lower Panel Replacement

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Put on gloves to protect your hands.

Remove the following parts.
1. Front Door Scuff Trim
  (Refer to: BD procedure - "INTERIOR TRIM ").
2. Cowl Side Trim
  (Refer to: BD procedure- "INTERIOR TRIM ").
Using a screwdriver or remover, remove the Crash Pad Side Cover (A).

Fig 1: Locating Crash Pad Side Cover
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Screws, remove the Crash Pad Lower Panel (A).

Fig 2: Crash Pad Lower Panel Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Crash Pad Switch Connectors (A) and Diagnosis Connector (B).

Fig 3: Crash Pad Switch Connectors
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.