Repair Procedures: Reassembly

Install the Hub Bearing to the Knuckle Assembly.
1. Lay the Knuckle Assembly (A) on a Press.
2. Lay a new Hub Bearing upon the Knuckle Assembly (A).
3. Lay a Suitable Adapter (B) upon the Hub Bearing.
4. Install the Hub Bearing to the knuckle assembly by using press.
  
  Fig 1: Installing Hub Bearing To Knuckle Assembly
  Courtesy of HYUNDAI MOTOR AMERICA
  CAUTION:
  - Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
  - Always use a new wheel Bearing Assembly.
Install the Hub Assembly to the Knuckle Assembly.
1. Lay the Hub Assembly (A) upon a Suitable Adapter (C).
2. Lay the Knuckle Assembly (B) upon the Hub Assembly (A).
3. Lay a Suitable Adapter (C) upon the Hub Bearing.
4. Install the Hub Assembly (A) to the Knuckle Assembly (B) by using a Press.
  
  Fig 2: Installing Hub Assembly To Knuckle Assembly
  Courtesy of HYUNDAI MOTOR AMERICA
  
  CAUTION: Do not press against the inner race of the hub bearing because that can cause damage to the bearing assembly.
Install the Snap Ring (A).

Fig 3: Installing Snap Ring
Courtesy of HYUNDAI MOTOR AMERICA