FixVault
Home › Hyundai › 2016 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L GDI › Engine Coolant Temperature Sensor (ECTS) › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the Ignition Switch OFF.
  2. Remove the ECTS (Refer to: "Removal ").
  3. After immersing the Thermistor of the sensor into Engine Coolant, measure resistance between the ECTS Terminals 3 and 4.
  4. Check that the resistance is within the Specification.

    Specification  : Refer to: "SPECIFICATION ".

About FixVault