FixVault
Home › Hyundai › 2016 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L GDI › Heated Oxygen Sensor (HO2S) › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the Ignition Switch OFF.
  2. Disconnect the HO2S Connector.
  3. Measure resistance between the HO2S Terminals 4 and 5 [B1/S1].
  4. Measure resistance between the HO2S Terminals 3 and 4 [B1/S2].
  5. Check that the resistance is within the Specification.

    Specification  : Refer to: "SPECIFICATION ".

About FixVault