FixVault
Home › Hyundai › 2016 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L GDI › Purge Control Solenoid Valve (PCSV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Purge Control Solenoid Valve Connector (A).
  3. Disconnect the Vapor Hoses (B) from the Purge Control Solenoid Valve.
  4. Remove the valve after removing the bolt (C).
    Fig 1: Purge Control Solenoid Valve & Connector And Vapor Hoses
    G10607980Courtesy of HYUNDAI MOTOR AMERICA
About FixVault