FixVault
Home › Hyundai › 2016 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System - 1.6L GDI › Accelerator Pedal › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Negative (-) Battery Cable.
  2. Disconnect the Accelerator Position Sensor Connector (A).
    Fig 1: Accelerator Position Sensor Connector
    G10608022Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the Installation Bolt (B) and Nuts (C), remove the Accelerator Pedal Module.
Fig 2: Accelerator Pedal Module Installation Bolt (1 Of 2)
G10608023Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Accelerator Pedal Module Installation Nuts (2 Of 2)
G10608024Courtesy of HYUNDAI MOTOR AMERICA
About FixVault