FixVault
Home › Hyundai › 2016 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System - 1.6L GDI › Fuel Pump › Repair Procedures › Removal

Repair Procedures: Removal

  1. Release the Residual Pressure in Fuel Line (Refer to: "RELEASE RESIDUAL PRESSURE IN FUEL LINE " in this procedure).
  2. Remove the Rear Seat [LH] (Refer to: "Seat" in BD procedure).
  3. Remove the fuel Pump Service Cover (A).
    Fig 1: Fuel Pump Service Cover
    G10608006Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the Fuel Pump Connector (A).
  5. Disconnect the Fuel Feed Tube Quick Connector (B).
  6. Disconnect the Fuel Tank Pressure Sensor Connector (C).
  7. Disconnect the Vapor Tube Quick-Connector (D).
  8. Remove the Plate Cover (E) after removing the Installation Bolts, remove the Fuel Pump from the Fuel Tank.
Fig 2: Fuel Pump Related Components
G10608007Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Fuel Pump
G10608008Courtesy of HYUNDAI MOTOR AMERICA
About FixVault