Repair Procedures: Replacement

Remove the Front Wheel & Tire.
Tightening Torque:

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Fig 1: Front Wheel & Tire
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Be careful not to damage to the Hub Bolts when removing the front Wheel & Tire.
Remove the Wheel Speed Sensor Bracket (B) and Wheel Speed Sensor (A).
Tightening Torque:

(B, C) 7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7lb-ft)

Fig 2: Wheel Speed Sensor With Mounting Bolt (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Wheel Speed Sensor Bracket With Mounting Bolt (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Stabilizer Link (B) with the Front Strut Assembly (A) after loosening the Nut.
Tightening Torque:

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Fig 4: Front Strut Assembly With Nut
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the Strut Mounting Nut.
Tightening Torque:

44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft)

Fig 5: Loosening Strut Mounting Nut
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- Tighten under unladen condition when installing.
Disconnect the Front Strut Assembly (A) with the Front Axle by loosening the Bolt & Nut.
Tightening Torque:

137.3 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

Fig 6: Front Strut Assembly With Bolts And Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.