Repair Procedures: Replacement

Disconnect the Back-Up Lamp Switch Connector (A).

Fig 1: Back Up Lamp Switch Connector Location
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Back-Up Lamp Switch (A).

Fig 2: Back Up Lamp Switch Location
Courtesy of HYUNDAI MOTOR AMERICA
Replace a new one and install the Back-Up Lamp Switch.
Tightening Torque:

29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)