FixVault
Home › Hyundai › 2016 › Veloster Turbo R-Spec, Automatic DCT Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Manifold Absolute Pressure Sensor (MAPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Manifold Absolute Pressure Sensor Connector (A).
  3. Remove the Installation Bolt (B), and then remove the Sensor from the Surge Tank.
Fig 1: Manifold Absolute Pressure Sensor Connector With Installation Bolt
G10604534Courtesy of HYUNDAI MOTOR AMERICA
About FixVault