Heater Control Unit Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the center facia panel (A).

Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the audio assembly (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors.

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A).

Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the heater control unit (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connectors (A) and hose (B).

Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.