FixVault
Home › Hyundai › 2017 › Accent Value Edition › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module & Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console.

    (Refer to "CONSOLE ")

  4. Remove the rear heating joint duct (A).
    G12018102Courtesy of HYUNDAI MOTOR AMERICA
  5. Pull up the lock, of the SRSCM connector, the disconnect the connector (A and B).
    G12018103Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.
About FixVault