FixVault
Home › Hyundai › 2017 › Azera Base › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Floor Console › Rear Console Cover › Repair Procedures › Replacement

Repair Procedures: Replacement

CAUTION:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to scratch the body surface.
  • Put on gloves to protect your hands.
  1. Remove the console rear complete assembly.

    (Refer to Floor Console - "Floor Console Assembly ")

  2. After loosening the mounting screws, then remove the rear console cover (A).
    Fig 1: Rear Console Cover Mounting Screws
    G12091397Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector (A).
    Fig 2: Locating Connector
    G12091398Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are connected in properly.
    • Replace any damage clips.
About FixVault