FixVault
Home › Hyundai › 2017 › Azera Base › Repair and Diagnosis › Electrical › Gauges › Crash Pad › Steering Column Shroud Panel › Repair Procedures › Replacement

Repair Procedures: Replacement

CAUTION:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Take care not to scratch the body surface.
  • Put on gloves to protect your hands.
  1. After loosening the mounting screws, then remove the steering column shroud panel (A).
    Fig 1: Locating Steering Column Shroud Panel With Mounting Screws
    G12091435Courtesy of HYUNDAI MOTOR AMERICA
  2. Disconnect the connector (A).
    Fig 2: Locating Connector
    G12091436Courtesy of HYUNDAI MOTOR AMERICA
  3. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector are connected in properly.
    • Replace any damaged clips.
About FixVault