FixVault

Repair Procedures: Inspection

  1. Ignition "ON"
  2. Blow warm air into the in-car sensor air inlet. Measure sensor resistance between 2 and 4 terminals.
    Fig 1: In-Car Sensor Connector Terminals
    G12093408Courtesy of HYUNDAI MOTOR AMERICA
    Temperature [°C (°F)] Resistance between terminals 2 and 4 (kΩ)
    60 (140) 7.463 ± 2.6%
    50 (122) 10.810 ± 2.2%
    35 (95) 19.59 ± 1.6%
    25 (77) 30.00 ± 1.2%
    15 (59) 47.130 ± 1.7%
    0 (32) 97.710 ± 2.4%
    -15 (5) 216.1 ± 3.2%
    -30 (-22) 509.6 ± 4.1%
    NOTE: In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.