FixVault
Home › Hyundai › 2017 › Azera Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning System › In-Car Sensor › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash pad.

    (Refer to CRASH PAD LOWER PANEL Body - "Crash Pad Lower Pad")

  3. Disconnect the connector of in-car sensor.

    Loosen the mounting 2 screws and then remove the in-car sensor (B).

    Fig 1: Locating In-Car Sensor With Mounting Screws
    G12093409Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is the reverse order of removal.
About FixVault