FixVault
Home › Hyundai › 2017 › Azera Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Blower System › Intake Actuator › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad.

    (Refer to Body - "MAIN CRASH PAD ASSEMBLY ")

  3. Disconnect the Intake actuator connector (A).
  4. Loosen the mounting screw and then remove the intake actuator (B).
    Fig 1: Locating Intake Actuator With Mounting Screws
    G12093475Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse order of removal.
About FixVault