Pressure Side Impact Sensor
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).
- Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the front door trim.
(Refer to Body - "FRONT DOOR TRIM ")
- Disconnect the pressure side impact sensor connector (A) and remove the pressure side impact sensor mounting screws (B).